| Customization: | Available |
|---|---|
| Application: | Automation Equipment, Audio and Video Equipment, Moving Machinery |
| Operating Speed: | High Speed |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
N25 Micro motor Series
The N25 Micro motor offers powerful holding torque in a variety of sizes.
| 1.Standard Operating Conditions | ||||||||
| No. | Items | Specifications | ||||||
| 1/1 | Rated Voltage | DC 3.7V 3.7V DC constant between motor terminals |
||||||
| 1/2 | Operating Voltage Range |
DC:3~5.0V 3~5.0V DC constant between motor terminals |
||||||
| 1/4 | Direction of Rotation | CW |
||||||
| 1/5 | Operating Temperature Range/Humidity range |
-20~60ºC | ||||||
| 1/6 | Storage Temperature Range |
-30~65ºC | ||||||
| 1/7 | Motor Position | All directions of protruded shaft |
||||||
| No. | Items | Specifications | ||||||
| 2/1 | : Motor Position |
Motor to be held with shaft horizontally |
||||||
| 2/2 | Power Source |
Regulated power supply which assures unquestionable measurement |
||||||
| 2/3 | Direction of Rotation: |
CW when view from output shaft side |
||||||
| 2/4 | Environmental Temperature and Humidity |
35ºC,51%.,JIS (20ºC±2ºC 65%±5%RH) The test is made in principle at a temperature between 10ºCto30ºC, and at a relative humidity between 30%to 85%. If the test is questionable, it shall be judged from the test made at JIS Standard Testing Condition(20ºC±2ºC,65% ±5%RH) |
||||||
| 3.Electrical Characteristics | ||||||||
| No. | Items | :Specifications | ||||||
| 3/1 | : Rated load Current |
80mA 80mA max |
||||||
| 3/2 | Rated Load Speed |
14600rpm±10% | ||||||
| 3/3 | Stall Current |
mA(3) mA max(No more than 3 seconds) |
||||||
| 4.Mechanical Characteristics | ||||||||
| No. | Items | Specifications | ||||||
| 4/1 | Motor Position requirement |
As per the dimensional drawing No remarkable deformation or superfical defects to be observed by visual check. Fastened parts to be fixed firmly |
||||||
| 4/2 | Shaft End Play |
0.05~0.3mm | ||||||
| 4/3 | Mechanical Noise |
60dB.,JIS-A(RMS),<26.7dB 60dB(max.) with following condition. load,related voltage (RMS)on JIS-A scale With motor to be set and measured as below Background noise: 26.7dB max |
||||||
| 4/4 | External Appearance |
See Outline Drawing |
||||||
| Shipment : |
| Pirce Term : |
){kind=link}